RFID Accessories

Impinj Gateway Suspended Ceiling Mounting Kit The Impinj Gateway Suspended Ceiling Mounting Kit simplifies xArray and xSpan installation in suspended ceiling applications. The kit contains a custom-drilled 2’x2’ plate that replaces a standard ceiling tile as well as the screws, anchors, and cables required to support the plate and gateway.

Impinj Power Supply & Line Cord For the Speedway R420, R220 and Speedway xPortal readers, the universal power supply and specific regional power cord are optional, depending on whether or not the Power over Ethernet (PoE) option is used. If the PoE option is not used, you must order a universal power supply and specific regional power cord. 

Impinj R700 Antenna Hub  Scaling a RAIN RFID IoT solution just got easier with the release of the Impinj R700 Antenna Hub. Designed to help Impinj partners scale their RAIN RFID solutions cost-effectively and with simplicity, the Impinj R700 Antenna Hub has eight output ports to connect up to 32 antennas to a single Impinj R700 RAIN RFID Reader, enabling a RAIN RFID solution that requires multiple read zones. The Impinj R700 Antenna Hub includes support that enables one cable to…

Impinj R700 Water Resistant Case With an IP 54 rating, the Impinj R700 Water Resistant Case case provides additional protection from dust and water spray. This water resistant case is compatible with the Impinj R700 RAIN RFID Reader. The Impinj R700 reader is rated at IP 50 and using this water resistant case will increase the rating to IP 54 for the front of the reader.

Impinj Speedway Antenna Hub The Impinj Speedway Antenna Hub provides a low-cost opportunity to drive many antennas from a single fixed RAIN RFID reader. This antenna hub connects up to 32 antennas to a single Impinj Speedway R420 reader, up to 16 antennas to a single Impinj Speedway R220 reader (reader must be updated to the Firmware Version 7.6), and up to 8 antennas to a single Impinj Speedway R120 reader. The Speedway Antenna Hub makes RFID monitoring…

Impinj Speedway Connect Software Impinj Speedway Connect is liscensed software that runs on the Impinj Speedway R420, R220, R120, xSpan, xArray, and xPortal readers enabling users to easily set configurations for a single reader and quickly access RFID data. This software provides multiple protocols for passing RFID data to an application without costly software development or middleware expenses. The simplified graphical user interface enables even those unfamiliar with RFID to set basic…

Impinj Speedway Reader Port Pack The Impinj Speedway Reader Port Pack provides a low-cost solution to drive many antennas from a single, fixed RFID reader. This port pack enables up to 32 antennas to a single Impinj Speedway R420 reader, up to 16 antennas to a single Impinj Speedway R220 reader (reader must be updated to the Firmware Version 7.6), and up to 8 antennas to a single Impinj Speedway R120 reader. 

Impinj Speedway Revolution GPIO Adapter  The Impinj Speedway Revolution GPIO Adapter allows for the simultaneous control of up to four Impinj Speedway Antenna Hubs per one Impinj Speedway Revolution R420 Reader. Each hub supports up to 8 antennas for a maximum of 32 antennas per Speedway R420 (4 hubs/R420 x 8 antennas/hub). This GPIO Adapter is also compatible with the Impinj Speedway R120 Reader and the Impinj Speedway R220 Reader (reader must be…

Impinj Speedway Revolution GPIO Box Impinj designed the Speedway Revolution GPIO Box for use with the Speedway Revolution reader to provide convenient access to the reader’s GPIO (General Purpose Input/Output) port. The GPIO Box interfaces with the reader via a supplied HD15 cable, and separates each input and output signal to easy-access screw terminals. Neighboring ground and power terminals accompany each signal terminal to easily connect three-wire devices. The GPIO Box also includes an…