This is a demo store. No orders will be fulfilled.
Impinj Speedway Revolution GPIO Box
In stock
SKU
IPJ-A5000-000
€99.81
Quick Overview
Impinj Speedway Revolution GPIO Box
Impinj designed the Speedway Revolution GPIO Box for use with the Speedway Revolution reader to provide convenient access to the reader’s GPIO (General Purpose Input/Output) port. The GPIO Box interfaces with the reader via a supplied HD15 cable, and separates each input and output signal to easy-access screw terminals. Neighboring ground and power terminals accompany each signal terminal to easily connect three-wire devices. The GPIO Box also includes an on-board relay to interface with devices require high wattage or an open/short signal. A universal power supply end line cord is also required if the 5VDC supplied by the reader is insufficient (not included, purchase separately).
Write Your Own Review
| File to download: | IPJ_Speedway_Rev_GPIOBox_Datasheet_20100528.pdf |
|---|---|
| File to download: |
Features
- Easy-access screw terminals.
- Power and ground terminals for each input and output.
- Each output can provide 250mA at 24V with optional external universal power supply.
- SPDT Relay output capable of 5A at 240VAC.
- Ability to use reader-supplied 5V for low power digital applications, including the SPDT Relay.
- Highly visible LED indicators for each input and output eases troubleshooting and diagnostics.
- Access to reader’s RS-232 serial interface.
Compatibility
Note: This port pack is NOT compatible with either the Impinj Speedway Revolution R220 UHF RFID Reader - 2 Port (IPJ-REV-R220), or the Impinj R700 RAIN RFID Reader (IPJ-R700-341).
| ELECTRICAL: | |
|---|---|
| Vcc: | Max 30V |
| Io: | 250 mA |
| li: | 250 mA |
| Ri: | 15 kΩ |
| ENVIROMENTAL: | |
| IP Rating: | IP 54 |
| Operating Temperature: | -25 to +55 °C (-13 to +131 °F) |
Validate your login