RFID Wet Inlays

SMARTRAC ShortDipole RFID Wet Inlay (Monza R6)

The SMARTRAC ShortDipole UHF RFID Tag inlays and tags are designed for global retail, industry, and supply chain applications and offer excellent performance in response to a wide range of requirements, including their use on lower detuning materials like cardboard, plastics, corrugated boxes and RTIs. They feature a size-optimized 10 cm / 4 inch form factor, suitable for a wide variety of supply-chain labels, and are also available in dry, wet, and paper tag delivery formats. Optimal form factor for converting into 4 inch wide labels. Wal-Mart, DoD and METRO Group compliant inlay. For pallets, cases, and item-level use.

Smartrac DogBone RFID Wet Inlay (M750)

The Smartrac DogBone RFID Wet Inlays excel with superior performance inside of demanding environments and on tough-to-tag materials, due to the inlay's exceptional tolerance against the detuning effect of high dielectric materials. With the M750 IC, the Smartrac DogBone contains 96-bit EPC memory and 32-bit user memory. These inlays offer an enhanced 'autotune' adaptive RF tuning feature, which helps ensure quality work at peak efficiency, even in rapidly changing environments. The M750 IC is compatible with the Global GS1 UHF Gen2v2 standard and has a privacy mode that enables loss prevention and protects consumer privacy. Further, these inlays are manufactured to the industry's highest quality standards, as confirmed by the RFID lab at Auburn University. 

SMARTRAC Belt RFID Wet Inlay (Monza R6)

SMARTRAC’s Belt RFID inlays are designed for item level, logistics, and retail applications offering high performance in apparel and brand protection, industrial and supply chain management solutions. The special design takes into account RF requirements for close coupling. They have good tolerance and performance on difficult-to-tag or low-detuning materials such as cardboard and plastics, and in other demanding environments. These tags are included on the approved inlay list by the ARC Program at the RFID Lab at Auburn University when used in retail applications, and comply with categories A, B, C, D, F, G, I, K, M, N, Q, W2, W3, W4, W5, and Y.

SMARTRAC ShortDipole RFID Wet Inlay (Monza R6-P)

SMARTRAC ShortDipole RFID Wet Inlay's have a 101 mm / 4-inch form factor, making them suitable for use with a wide range of supply chain labels. The ShortDipole RFID Wet Inlay is now offered with the Impinj Monza R6-P chip that comes with an Autotune feature, which helps the ShortDipole product to work at peak efficiency, even in rapidly changing environments. Inlays with Monza R6-P offer additional features such as add-on user memory and on-demand memory configuration as well as a kill function and easy access control to change tag information for stored data if required. SMARTRAC’s inlays and tags are compliant with ISO 9001:2015 Quality Management and ISO 14001:2015 Environmental Management, which ensures a reliable and state-of-the-art product that meets a variety of application needs, enhancing RFID usage for difficult-to-tag materials.

SMARTRAC MiniWeb RFID Wet Inlay (Monza R6)

SMARTRAC MiniWeb RFID Wet Inlays are designed especially for apparel applications. They are high quality and can be converted into small sized hang tags and other apparel labels. MINIWEB tags and inlays have superior close coupling features. MINIWEB inlays and tags have a small compact form factor, which can be easily converted into small-sized hangtags and other apparel labels. SMARTRAC’s inlays and tags are compliant with ISO 9001:2015 Quality Management and ISO 14001:2015 Environmental Management, which ensure a reliable and state-of-the-art product that meets a variety of application needs, especially in the retail environment.

Smartrac DogBone RFID Wet Inlay (M730)

Smartrac DogBone RFID Wet Inlays excel through superior performance in demanding environments and on difficult-to-tag materials, due to their high tolerance against the detuning effect of high dielectric materials. Equipped with the M730 IC from Impinj, these tags feature 128 bit-EPC memory and offer an enhanced “autotune” adaptive RF tuning feature. In addition, the M730 IC has an improved read and write sensitivity, enabling faster and more accurate bulk reading compared to Impinj R6/R6-P. 

SMARTRAC MIDAS FLAGTAG® with RA-25 Adhesive (Monza R6-P)

The SMARTRAC MIDAS FLAGTAG® is a great low cost alternative to on-metal tags with a foam structure. The MIDAS FLAGTAG® is designed for item-level tagging on diverse surfaces, especially metallic surfaces like foil packaging, and offers excellent performance in less demanding physical environments. When compared to other foam-based inlays and hard tags designed for use in tougher environmental conditions, the MIDAS FLAGTAG® is an ideal on-metal solution for product or part authentication, supply chain, and asset management. Furthermore, these tags can also be used on plastic and cardboard surfaces and works well as a standard tag.

The MIDAS FLAGTAG® is equipped with an innovative small form factor with a total size of 60 x 21 mm when used as a standard flat paper tag. Its special feature is that a flag can be created at the end of tag with a final paper tag size of 43 x 21 mm after folding, and with an exposed flag size of 17 x 21 mm. The folded part of the tag sticks out of the metal like a flag, and the attached antenna part uses the metal surface as part of the antenna structure to increase the performance of the tag. These tags are equipped with the Impinj Monza R6-P IC that features an Autotune function, which helps each MIDAS FLAGTAG® to work at peak efficiency, even in rapidly changing environments. Additionally, the Monza R6-P chip offers unique TID, enabling pre-serialized EPC, and is 100% performance tested.

Smartrac MINIBLOCK HF RFID Wet Inlay (NXP ICODE SLIX)

Smartrac MINIBLOCK HF RFID Wet Inlays are the smallest square shaped top performers designed for package and item level applications. Equipped with 896 bits of user memory, these compact inlays provide excellent performance for small item level tagging and less material detuning.

SMARTRAC Block Lite HF Wet Inlay (NXP ICODE SLIX2)

Featuring the NXP ICODE SLIX2, the SMARTRAC Block Lite HF Wet Inlay boasts an extended user memory of 2,528 bits. This tag provides excellent performance in all print media products and applications, including self-check with stack reading capability, and EAS. The SMARTRAC Block Lite is an ideal product to complement advanced media management systems, while offering a lifetime library warranty. SMARTRAC inlays and tags are compliant with ISO 9001:2015 quality management and ISO 14001:2015 environmental management standards. These standardizations ensure a reliable and state-of-the-art product that meets a variety of application needs, where high performance is a critical parameter.

SMARTRAC Round 25 HF RFID Wet Inlay (NXP lCode lLT-M 23pF)

SMARTRAC HF tags and inlays offer great application flexibility and fit-for-function design in the most demanding applications. HF 13.56 MHz ISO-compliant RFID technology is a proven, globally accepted solution for a vast array of markets. Popular industry applications consist of library and rental item level tagging for automated self-checkout and return of printed and digital media. HF RFID technology offers proven robust performance with short-to-medium read ranges even when used around difficult materials such as liquids and metals.

The SMARTRAC Round 25 HF RFID Wet Inlays offer excellent performance in document and item identification where close stacking occurs, which is a challenging environment for other passive protocols. With a desirable shape and size, these inlays are designed for close-stacking applications and for applications where very fast inventory of multiple tags in the field occurs. The Round 25 Wet Inlays are equipped with high anti-collision rate and a privacy feature with a 32-bit kill password.