865-868 MHz (EU & Related)
-
Impinj Threshold (LP) Indoor RFID Antenna (FCC/ETSI)€99.75
Impinj Threshold (LP) Indoor RFID Antenna (FCC/ETSI)
Initially designed for boundary/threshold crossing applications, the Impinj Threshold antenna has a very wide beam width to maximize zone coverage. Threshold antennas provide a consistent and continuous read zone when linearly distributed head- to-tail. At 46 x 9 x 2 cm, the Threshold antenna’s planar form factor fits readily onto fencing or other borders.
-
Impinj Speedway Antenna Hub€99.75
Impinj Speedway Antenna Hub
The Impinj Speedway Antenna Hub provides a low-cost opportunity to drive many antennas from a single fixed RAIN RFID reader. This antenna hub connects up to 32 antennas to a single Impinj Speedway R420 reader, up to 16 antennas to a single Impinj Speedway R220 reader (reader must be updated to the Firmware Version 7.6), and up to 8 antennas to a single Impinj Speedway R120 reader. The Speedway Antenna Hub makes RFID monitoring applications requiring many antennas, including large contiguous read zones and smart shelves, cost-effective, and easy to deploy.
-
Impinj R700 Antenna Hub€99.75
Impinj R700 Antenna Hub
Scaling a RAIN RFID IoT solution just got easier with the release of the Impinj R700 Antenna Hub. Designed to help Impinj partners scale their RAIN RFID solutions cost-effectively and with simplicity, the Impinj R700 Antenna Hub has eight output ports to connect up to 32 antennas to a single Impinj R700 RAIN RFID Reader, enabling a RAIN RFID solution that requires multiple read zones. The Impinj R700 Antenna Hub includes support that enables one cable to power the antenna hub, control active RF output, and carry the RAIN RFID signal. This requires fewer cables to install the Impinj R700 Antenna Hub, making it easier and less costly to install, and creates fewer points of failure in deployment.
-
Impinj R700 Water Resistant Case€99.75
Impinj R700 Water Resistant Case
With an IP 54 rating, the Impinj R700 Water Resistant Case case provides additional protection from dust and water spray. This water resistant case is compatible with the Impinj R700 RAIN RFID Reader. The Impinj R700 reader is rated at IP 50 and using this water resistant case will increase the rating to IP 54 for the front of the reader.