RFID GPIO Devices
-
Impinj Speedway Revolution GPIO Adapter€100.67
Impinj Speedway Revolution GPIO Adapter
The Impinj Speedway Revolution GPIO Adapter allows for the simultaneous control of up to four Impinj Speedway Antenna Hubs per one Impinj Speedway Revolution R420 Reader. Each hub supports up to 8 antennas for a maximum of 32 antennas per Speedway R420 (4 hubs/R420 x 8 antennas/hub). This GPIO Adapter is also compatible with the Impinj Speedway R120 Reader and the Impinj Speedway R220 Reader (reader must be updated for Firmware version 7.6). One single Impinj R120 reader can be upgraded to eight antenna ports and one single R220 reader can be upgraded to sixteen antenna ports when used in combination with the a Speedway Antenna Hub and GPIO adapter.
-
Impinj Speedway Revolution GPIO Box€100.67
Impinj Speedway Revolution GPIO Box
Impinj designed the Speedway Revolution GPIO Box for use with the Speedway Revolution reader to provide convenient access to the reader’s GPIO (General Purpose Input/Output) port. The GPIO Box interfaces with the reader via a supplied HD15 cable, and separates each input and output signal to easy-access screw terminals. Neighboring ground and power terminals accompany each signal terminal to easily connect three-wire devices. The GPIO Box also includes an on-board relay to interface with devices require high wattage or an open/short signal. A universal power supply end line cord is also required if the 5VDC supplied by the reader is insufficient (not included, purchase separately).