Fixed RFID Readers

Impinj Speedway Revolution R420 UHF RFID Reader (4 Port)

The Speedway Revolution R420 UHF RFID Reader delivers the performance, quality, and reliability necessary for maximum visibility of tagged inventory and assets. Able to maintain high read rates regardless of RF noise or interference as the readers adapt automatically for optimal functionality, Speedway readers are a powerful piece of item visibility platform solutions. Impinj's innovative Speedway® Revolution RFID reader with Autopilot automatically optimizes its operation to the environment—delivering peak performance at all times. The Speedway Revolution reader improves upon the legacy of the original, EPC-certified Speedway reader that was the first high-performance reader designed from the ground up (not merely upgraded) to support the EPCglobal UHF Gen 2 standard in its entirety. The Speedway R420 reader is supported by a suite of software, hardware, and antennas that deliver application and deployment flexibility, making installation and expansion easier than ever.

Impinj Speedway Revolution R220 UHF RFID Reader (2 Port)

The Speedway Revolution R220 UHF RFID Reader delivers the performance, quality, and reliability necessary for maximum visibility of tagged inventory and assets. Able to maintain high read rates regardless of RF noise or interference as the readers adapt automatically for optimal functionality, Speedway readers are a powerful piece of item visibility platform solutions. Impinj's innovative Speedway® Revolution RFID reader with Autopilot automatically optimizes its operation to the environment—delivering peak performance at all times. The Speedway Revolution reader improves upon the legacy of the original, EPC-certified Speedway reader that was the first high-performance reader designed from the ground up (not merely upgraded) to support the EPCglobal UHF Gen 2 standard in its entirety. The Speedway R220 reader is supported by a suite of software, hardware, and antennas that deliver application and deployment flexibility, making installation and expansion easier than ever.

Impinj Speedway Revolution R120 UHF RFID Reader (1 Port)

The Speedway Revolution R120 UHF RFID Reader delivers the performance, quality, and reliability necessary for maximum visibility of tagged inventory and assets. Able to maintain high read rates regardless of RF noise or interference as the readers adapt automatically for optimal functionality, Speedway readers are a powerful piece of item visibility platform solutions. Impinj's innovative Speedway® Revolution RFID reader with Autopilot automatically optimizes its operation to the environment—delivering peak performance at all times. The Speedway Revolution reader improves upon the legacy of the original, EPC-certified Speedway reader that was the first high-performance reader designed from the ground up (not merely upgraded) to support the EPCglobal UHF Gen 2 standard in its entirety. The Speedway R120 reader is supported by a suite of software, hardware, and antennas that deliver application and deployment flexibility, making installation and expansion easier than ever.

Impinj R700 RAIN RFID Reader

The Impinj R700 RAIN RFID Reader is designed to support global enterprise RAIN deployments that need high performance and reliability. The Impinj R700 reader delivers industry-leading performance, enterprise reliability and security, and modern developer tools. IoT developers can easily build and deploy custom enterprise applications with a Linux OS, REST API, and native support for industry-standard data formats and protocols, such as MQTT. The Impinj R700 delivers increased support for on-reader applications – including 10x the processing power. Plus, when combined with tags based on Impinj M700 series tag chips, the Impinj R700 advances RAIN RFID performance at dock doors, conveyors, and store exits.

Impinj xArray Gateway RFID Reader

The Impinj xArray is a fixed infrastructure RFID gateway that integrates a RFID reader with antennas to provide always-on, wide-area monitoring for real-time identification, location, and direction of RFID tagged items. The xArray provides wide area monitoring through its beam-forming antenna array, which delivers full power throughout a 40 foot diameter when ceiling-mounted at 15 feet high. The xArray can distinguish 52 different antenna beams providing for location assignment within the read zone, and the antennas radiate a linear pattern in both the horizontal and vertical paths in order to read tags in any orientation. The reader itself is optimized to read many thousands of tags very quickly, and to distinguish tags of interest from the rest of the field. This device can be configured to handle both wide area monitoring scenarios and portal applications. Moreover, Impinj has added robust tag direction capability that has been proven accurate even in difficult, real world environments.

Both cost-effective and easy to deploy, the xArray system’s slim profile was designed to mount easily into a single tile of a standard drop ceiling, where it is unobtrusive and able to blend into any décor. The xArray includes a tilt sensor, hysteresis feedback, and programmable beacon to alert users when the system or environment may need attention. The xArray draws minimal power (which keeps costs low) and runs from standard PoE (IEEE 802.3af), so there is no need to hire an expensive electrician for installation. Furthermore, the xArray is programmed using industry-standard LLRP and Impinj extensions, for maximum re-use of code and minimum delays due to learning curve with new APIs.

Zebra FX7500 RFID Reader - 4 Port

The new FX7500 Fixed RFID Reader introduces advanced Zebra-designed RFID radio technology for faster, more accurate read rates and more consistent performance even in challenging environments. The new radio is paired with a more flexible Linux-based network architecture that integrates the tools and open-standard interfaces needed for fast, easy deployment with RFID and back-end applications. The result is a fixed RFID reader that sets a new performance standard — delivering peak performance at all times with excellent reader sensitivity and better interference rejection, at a lower cost per read point. The FX7500 is available with an internal USB Host USB port which supports a Wi-Fi/Bluetooth dongle for direct wireless connectivity to your Wi-Fi network, as well as Bluetooth-enabled computers and other devices. There’s no need for hard-wired connections to the access point. Zebra also offers a FX7500 reader configuration that excludes the non-critical, internal Host USB port. This configuration offers the same features and functionality but requires an external passive or powered USB hub to connect to Bluetooth or Wi-Fi dongles to enable wireless communications and perform firmware updates instead of plugging a USB stick/dongle directly into the reader’s USB port.

Zebra FX7500 RFID Reader - 2 Port

The new FX7500 Fixed RFID Reader introduces advanced Zebra designed RFID radio technology for faster, more accurate read rates and more consistent performance even in challenging environments. The new radio is paired with a more flexible Linux-based network architecture that integrates the tools and open-standard interfaces needed for fast, easy deployment with RFID and back-end applications. The result is a fixed RFID reader that sets a new performance standard — delivering peak performance at all times with excellent reader sensitivity and better interference rejection, at a lower cost per read point. The FX7500 is available with an internal USB Host USB port which supports a Wi-Fi/Bluetooth dongle for direct wireless connectivity to your Wi-Fi network, as well as Bluetooth-enabled computers and other devices. There’s no need for hard-wired connections to the access point. Zebra also offers a FX7500 reader configuration that excludes the non-critical, internal Host USB port. This configuration offers the same features and functionality but requires an external passive or powered USB hub to connect to Bluetooth or Wi-Fi dongles to enable wireless communications and perform firmware updates instead of plugging a USB stick/dongle directly into the reader’s USB port.

Zebra ST5501/ST5500 Transition Point Integrated RFID Reader

When inventory moves in or out of your facility through receiving and entry/exit points, you need to know which direction it is traveling to understand where it is headed to better track location or prevent theft. Where standard RFID readers detect the presence of a tagged item, this specially designed ready-to-use Zebra ST5501/ST5500 Transition Point Integrated RFID Reader utilizes industry-leading advanced RFID technology to not only track items on the move, but to also determine whether items are entering or leaving an area. Deployment is easy — with Zebra’s advanced FX7500 Fixed RFID reader and pre-configured antenna integrated into one housing, there’s only one piece of hardware to install. And since you can suspend it from the ceiling, it’s easy to install in virtually any facility and any environment.

Zebra FX9600 RFID Reader - 4 Port

The Zebra FX9600 RFID Reader delivers industry-best performance for high-volume, rugged environments. With support for PoE and PoE+, an IP 53 sealed housing rating, and four RF antenna ports, the FX9600 brings a new level of capability to asset tracking and inventory management applications. The FX9600 is available with an internal USB Host USB port which supports a Wi-Fi/Bluetooth dongle for direct wireless connectivity to your Wi-Fi network, as well as Bluetooth-enabled computers and other devices. There’s no need for hard-wired connections to the access point. With a best-in-class processor and expanded memory, the FX9600 offers the power needed to support very high traffic throughput and sophisticated software applications. Zebra also offers a FX9600 reader configuration that excludes the non-critical, internal Host USB port. This configuration offers the same features and functionality but requires an external passive or powered USB hub to connect to Bluetooth or Wi-Fi dongles to enable wireless communications and perform firmware updates instead of plugging a USB stick/dongle directly into the reader’s USB port.

Zebra FX9600 RFID Reader - 8 Port

The Zebra FX9600 RFID Reader delivers industry-best performance for high-volume, rugged environments. With support for PoE and PoE+, an IP 53 sealed housing rating, and eight RF antenna ports, the FX9600 brings a new level of capability to asset tracking and inventory management applications. The FX9600 supports a Wi-Fi/Bluetooth dongle for direct wireless connectivity to your Wi-Fi network, as well as Bluetooth-enabled computers and other devices. There’s no need for hard-wired connections to the access point. With a best-in-class processor and expanded memory, the FX9600 offers the power needed to support very high traffic throughput and sophisticated software applications.