RFID Readers
-
Zebra FX7500 RFID Reader - 2 PortAs low as €797.31
Zebra FX7500 RFID Reader - 2 Port
The new FX7500 Fixed RFID Reader introduces advanced Zebra designed RFID radio technology for faster, more accurate read rates and more consistent performance even in challenging environments. The new radio is paired with a more flexible Linux-based network architecture that integrates the tools and open-standard interfaces needed for fast, easy deployment with RFID and back-end applications. The result is a fixed RFID reader that sets a new performance standard — delivering peak performance at all times with excellent reader sensitivity and better interference rejection, at a lower cost per read point. The FX7500 is available with an internal USB Host USB port which supports a Wi-Fi/Bluetooth dongle for direct wireless connectivity to your Wi-Fi network, as well as Bluetooth-enabled computers and other devices. There’s no need for hard-wired connections to the access point. Zebra also offers a FX7500 reader configuration that excludes the non-critical, internal Host USB port. This configuration offers the same features and functionality but requires an external passive or powered USB hub to connect to Bluetooth or Wi-Fi dongles to enable wireless communications and perform firmware updates instead of plugging a USB stick/dongle directly into the reader’s USB port.
-
Zebra ST5501/ST5500 Transition Point Integrated RFID Reader€100.67
Zebra ST5501/ST5500 Transition Point Integrated RFID Reader
When inventory moves in or out of your facility through receiving and entry/exit points, you need to know which direction it is traveling to understand where it is headed to better track location or prevent theft. Where standard RFID readers detect the presence of a tagged item, this specially designed ready-to-use Zebra ST5501/ST5500 Transition Point Integrated RFID Reader utilizes industry-leading advanced RFID technology to not only track items on the move, but to also determine whether items are entering or leaving an area. Deployment is easy — with Zebra’s advanced FX7500 Fixed RFID reader and pre-configured antenna integrated into one housing, there’s only one piece of hardware to install. And since you can suspend it from the ceiling, it’s easy to install in virtually any facility and any environment.
-
Zebra FX9600 RFID Reader - 4 PortAs low as €999.13
Zebra FX9600 RFID Reader - 4 Port
The Zebra FX9600 RFID Reader delivers industry-best performance for high-volume, rugged environments. With support for PoE and PoE+, an IP 53 sealed housing rating, and four RF antenna ports, the FX9600 brings a new level of capability to asset tracking and inventory management applications. The FX9600 is available with an internal USB Host USB port which supports a Wi-Fi/Bluetooth dongle for direct wireless connectivity to your Wi-Fi network, as well as Bluetooth-enabled computers and other devices. There’s no need for hard-wired connections to the access point. With a best-in-class processor and expanded memory, the FX9600 offers the power needed to support very high traffic throughput and sophisticated software applications. Zebra also offers a FX9600 reader configuration that excludes the non-critical, internal Host USB port. This configuration offers the same features and functionality but requires an external passive or powered USB hub to connect to Bluetooth or Wi-Fi dongles to enable wireless communications and perform firmware updates instead of plugging a USB stick/dongle directly into the reader’s USB port.
-
Zebra FX9600 RFID Reader - 8 PortAs low as €1,174.07
Zebra FX9600 RFID Reader - 8 Port
The Zebra FX9600 RFID Reader delivers industry-best performance for high-volume, rugged environments. With support for PoE and PoE+, an IP 53 sealed housing rating, and eight RF antenna ports, the FX9600 brings a new level of capability to asset tracking and inventory management applications. The FX9600 supports a Wi-Fi/Bluetooth dongle for direct wireless connectivity to your Wi-Fi network, as well as Bluetooth-enabled computers and other devices. There’s no need for hard-wired connections to the access point. With a best-in-class processor and expanded memory, the FX9600 offers the power needed to support very high traffic throughput and sophisticated software applications.
-
Zebra MC3330xR Integrated RFID Handheld Reader€2,666.83
Zebra MC3330xR Integrated RFID Handheld Reader
Designed for standard-range data capture of RFID tags and barcodes for bulk inventory, the Zebra MC3330xR Integrated RFID Handheld Reader is loaded with innovative features that bring a new level of efficiency and accuracy to inventory and asset management applications. This handheld reader offers the same proven lightweight ergonomic design and superior RFID performance found on the MC3330R reader. Equipped with Zebra's most powerful and secure Android architecture, the MC3330xR comes standard with an ultra-powerful processor, an integrated NFC reader, and a 35% larger capacity battery for stellar performance in the most demanding environments. With the ability to capture RFID tags more than 6 m (19.7 ft) away, the MC3330xR helps workers capture RFID tags in half the time as the next leading competitor.
-
Zebra MC3390xR Integrated Long-Range RFID Handheld ReaderAs low as €3,792.34
Zebra MC3390xR Integrated Long-Range RFID Handheld Reader
Designed for extended range data capture of RFID tags and barcodes for bulk inventory, the Zebra MC3390xR Integrated RFID Handheld Reader is loaded with innovative features that bring a new level of efficiency and accuracy to inventory management, order fulfillment, cross-docking, and more. This handheld reader offers the same proven lightweight ergonomic design and superior RFID performance found on the MC3390R reader. Equipped with Zebra's most powerful and secure Android architecture, the MC3390xR comes standard with an ultra-powerful processor, an integrated NFC reader, and a 35% larger capacity battery for stellar performance in the most demanding environments. The integrated long-range antenna delivers best-in-class RFID read range with higher throughput, allowing for inventory counts to be accomplished more quickly and accurately. With the ability to capture RFID tags more than 18.2 m (60 ft) away, the MC3330xR helps workers capture RFID tags in half the time as the next leading competitor.
-
Alien ALR-9680 RFID Reader (4-port)€100.67
Alien ALR-9680 RFID Reader (4-port)
Simple, Low Profile, Gen 2 RFID Solution With Power-Over Ethernet (POE) and out-of-the-box software compatibility with other Alien readers, the ALR-9680 Gen 2 RFID Reader is a simple, low profile solution that enables users to start reading tags and developing solutions immediately. Easy to Integrate The ALR-9680 communicates via the easy-to-use Alien Reader Protocol, with key RFID platform support including Microsoft® BizTalk RFID, OatSystems, Oracle®, Xterprise and others. A well-documented SDK featuring .NET, Java and Ruby libraries enables easy development of custom interfaces to control the reader if desired. The user-friendly Alien RFID Gateway software enables the user to begin solution development immediately. Low System Cost The cost of installing AC power can sometimes rival the cost of the reader. The ALR-9680’s POE capability allows power to be delivered over properly-equipped local area networks, eliminating expensive AC wiring installation. The combination of this capability with up to 4 antenna significantly reduces the cost and complexity of installing an RFID read point.
-
Alien F800 RFID Reader€100.67
Alien F800 UHF RFID Reader
Alien® ALR-F800 is a best in class, self-optimizing Enterprise class reader that enables users to deploy best-in-class EPC Gen 2 RFID solutions for retail, supply chain, manufacturing, mobile asset tracking and asset management applications. Featuring a new fifth-generation reader architecture that intelligently adapts and configures based on its environment, the ALR-F800 provides the industry’s best Power over Ethernet (PoE) transmit power and performance.The ALR-F800 reader’s discrete architecture offers substantial improvements in function and performance over existing products in the market, enabling new levels of flexibility for system enhancements and future proofing. The improvements include industry standard MicroSD and USB slots for adding memory and additional capabilities such as cellular, Wi-Fi and Bluetooth. The F800 can accommodate large chunks of code, or entire applications loaded directly on the reader.
-
Alien ALR-F800-X Enterprise RFID Reader With Emissary (4-Port)€100.67
Alien ALR-F800-X Enterprise RFID Reader With Emissary (4-Port)
The ALR-F800-X is a truly transformational product created by the merging two core capabilities present in any solution. It is an ALR-F800 based 4-port Enterprise Class UHF Passive Reader and it is an Edge Service controller or manager that supports other readers in the network providing a complete Industry 4.0 solution. By transforming the reader into both a middleware host and an application host, multiple layers of complexity and cost are thereby eliminated. Additionally, by processing data elements at the source, the value of the data is exponentially increased, because individual read points throughout a vast enterprise can be examined and evaluated in real time. This adds immeasurably to the richness and quality of the Big Data analytic scenarios now emerging in every area of business life.
-
Zebra RFD8500 Bluetooth Handheld UHF RFID SledAs low as €1,195.12
Zebra RFD8500 Bluetooth Handheld UHF RFID Sled
With the Zebra RFD8500 Bluetooth Handheld UHF RFID Sled, you can empower select Zebra and compatible third-party mobile devices, tablets, and smart phones with enterprise-class UHF RFID and 1D/2D bar code scanning technology, whenever and wherever you need it — simply, easily and cost-effectively. Just pair this Bluetooth-enabled sled with your mobile device and attach the mobile device to the RFD8500 for a single-handed RFID reader solution or put the mobile device in a pocket or holster and use the RFD8500 in standalone mode. With support for Android, iOS, and in the future, Windows, you get real investment protection. The RFD8500 sleds you buy today will work with the devices you use now, and in the future. When it comes to performance, whether your workers are capturing RFID tags or bar codes, the RFD8500 is unparalleled; workers can capture tags and bar codes faster and with ease, improving productivity, operational efficiency, and customer service.