RFID Barcode Printers

Zebra ZQ310 Plus Outdoor Direct Thermal Mobile Printer (203 dpi, 2 Inch Print Width, Direct Thermal, Bluetooth, No Label Sensor, Outdoor Use)

The  Zebra ZQ310 Plus Outdoor Direct Thermal Mobile Printer is a label and receipt printer that features the latest Bluetooth® Classic and Bluetooth Low Energy standards, class-leading battery and power technologies for full-shift power, enterprise durability to handle everyday drops and bumps, and powerful remote management capabilities that significantly lower the total cost of ownership. Its is the only printer in its class to offer triple durability specifications: IP 54 sealing, a 1.5 m (5 ft) drop to concrete specification, and a 500-drop tumble specification, which simulates the real-world tumbling that follows a drop. With redesigned electronics, the Zebra ZQ310 Plus replaces the legacy ZQ310 Series printer to support long-term product continuity and availability.  The form, fit, function, and compatibility with Zebra mobile printer accessories and batteries remain the same as the ZQ310 Series printers. However, the new ZQ310 Plus model requires and ships with Windows drivers and firmware that are not backward compatible with legacy ZQ310 Series models. 

Zebra ZQ310 Plus Indoor Direct Thermal Mobile Printer (203 dpi, 2 Inch Print Width, Direct Thermal, WLAN 802.11ac, Bluetooth, Linered, Label Sensor, Indoor Use)

The Zebra ZQ310 Plus Indoor Direct Thermal Mobile Printer is a label and receipt printer that features the latest Bluetooth® Classic and Bluetooth Low Energy standards, class-leading battery and power technologies for full-shift power, enterprise durability to handle everyday drops and bumps, and powerful remote management capabilities that significantly lowers the total cost of ownership. Its is the only printer in its class to offer triple durability specifications: IP 54 sealing, a 1.5 m (5 ft) drop to concrete specification, and a 500-drop tumble specification, which simulates the real-world tumbling that follows a drop. With redesigned electronics, the Zebra ZQ310 Plus replaces the legacy ZQ310 Series printer to support long-term product continuity and availability. The form, fit, function, and compatibility with Zebra mobile printer accessories and batteries remain the same as the ZQ310 Series printers. However, the new ZQ310 Plus model requires and ships with Windows drivers and firmware that are not backward compatible with legacy ZQ310 Series models.

ZebraDesigner Pro Barcode and RFID Software (v3)

ZebraDesigner Pro Barcode and RFID Software enables you to easily create professional, industry-standard and compliant labels quickly and easily. It features a Windows®-based interface that is intuitive to use, virtually eliminating training and required technical skills. Pair ZebraDesigner with Zebra’s industrial, desktop and mobile printers to quickly design a customized print solution to fit your needs. Upon ordering, a license key that offers a robust toolset to create complex label designs will be electronically delivered by email. 

Zebra 802.11ac Wireless Card for Industrial Series Printers

Zebra 802.11ac Wireless Card for use with the Zebra ZT100, ZT200, ZT400, ZT510, and ZT600 Series Printers (US/Canada). 

Zebra Durability Enhancing Case with Shouldler Strap for ZQ520/ZQ521 Printers

Designed for use in harsh enviornments, this durability enhancing case adds an extra layer of protection in a soft case form factor. This case allows for the battery and ports to remain accessible via flaps and comes standard with a shouldler strap.

NOTE: This durability enhancing case CANNOT be used with a printer belt clip or MCR.

Zebra Soft Case with Shoulder Strap for ZQ620 & QLn320 Printers

Designed for use with Zebra ZQ620 and QLn320 Series Printers, this soft case adds an extra layer of protection in harsh environments. This case allows for the battery and ports to remain accessible and comes standard with a shoulder strap. While in the case, a compatible printer is IP 54-rated resistant to windblown water and dust.

NOTE: This case does NOT increase drop specification and does NOT include pockets or holders for media.

Zebra Soft Case with Shoulder Strap for ZQ510/ZQ511 Printers

Designed for use in harsh environments, this durability enhancing case adds an extra layer of protection in a soft case form factor. This case allows for the battery and ports to remain accessible via flaps and comes standard with a shoulder strap.

NOTE: This soft case CANNOT be used with a printer belt clip or MCR.

Zebra Exoskeleton Case with Shoulder Strap for ZQ510 & ZQ511 Printers

Designed for use with Zebra ZQ510 and ZQ511 Series Printers, this exoskeleton case adds an extra layer of protection in harsh environments. While in this case, a compatible printer's IP rating is increased to IP 65 and its drop specification is increased to 3 m (10 ft). This exoskeleton case can be used with single and extended battery packs, 4-slot printer power stations, and 1-slot charging cradles.

 NOTE: A compatible printer is NOT included and MUST be purchased separately.

Zebra Soft Case with Shoulder Strap for ZQ630 & QLn420 Printers

Designed for use with Zebra ZQ630 and QLn420 Series Printers, this soft case adds an extra layer of protection in harsh environments. This case allows for the battery and ports to remain accessible and comes standard with a shoulder strap. While in the case, a compatible printer is IP 54-rated resistant to windblown water and dust.

NOTE: This case does NOT increase drop specification and does NOT include pockets or holders for media.

Zebra Soft Case with Shoulder Strap for ZQ610 & QLn220 Printers

Designed for use with Zebra ZQ610 and QLn220 Series Printers, this soft case adds an extra layer of protection in harsh environments. This case allows for the battery and ports to remain accessible and comes standard with a shoulder strap. While in the case, a compatible printer is IP 54-rated resistant to windblown water and dust.

NOTE: This case does NOT increase drop specification and does NOT include pockets or holders for media.