RFID Accessories
-
Impinj Speedway Connect Software€100.67
Impinj Speedway Connect Software
Impinj Speedway Connect is liscensed software that runs on the Impinj Speedway R420, R220, R120, xSpan, xArray, and xPortal readers enabling users to easily set configurations for a single reader and quickly access RFID data. This software provides multiple protocols for passing RFID data to an application without costly software development or middleware expenses. The simplified graphical user interface enables even those unfamiliar with RFID to set basic reader configurations. Data is passed to the PC application in keystrokes via USB-HID, serial, Ethernet or Web delivery. Furthermore, the Speedway Connect allows for GPIO trigger events. Additionally, Speedway Connect offers location and direction capabilities when used in conjunction with the Impinj xArray or xSpan Gateway RFID Readers. Monitor tagged items, pallets, equipment, files, or people passing through doorways, hallways, or other zones of interest. By leveraging the powerful location and direction capabilities of Impinj gateways you can maximize operational visibility, automate management of product through the supply chain, and improve inventory availability for your customers.
-
Alien ALX-407 VESA Antenna Mounting Bracket€100.67
Alien ALX-407 VESA Antenna Mounting Bracket
The Alien ALX-407 VESA mounting bracket reliably mounts the Alien ALR-8697 and ALR-8698 antennas.
-
Zebra RFID Antenna Mounting Kit€89.66
Zebra RFID Antenna Mounting Kit
Standard 16-mount antenna mounting bracket kit for the Zebra AN440 and AN480 RFID Antennas.
-
Impinj Speedway Antenna Hub€100.67
Impinj Speedway Antenna Hub
The Impinj Speedway Antenna Hub provides a low-cost opportunity to drive many antennas from a single fixed RAIN RFID reader. This antenna hub connects up to 32 antennas to a single Impinj Speedway R420 reader, up to 16 antennas to a single Impinj Speedway R220 reader (reader must be updated to the Firmware Version 7.6), and up to 8 antennas to a single Impinj Speedway R120 reader. The Speedway Antenna Hub makes RFID monitoring applications requiring many antennas, including large contiguous read zones and smart shelves, cost-effective, and easy to deploy.
-
Impinj R700 Antenna Hub€100.67
Impinj R700 Antenna Hub
Scaling a RAIN RFID IoT solution just got easier with the release of the Impinj R700 Antenna Hub. Designed to help Impinj partners scale their RAIN RFID solutions cost-effectively and with simplicity, the Impinj R700 Antenna Hub has eight output ports to connect up to 32 antennas to a single Impinj R700 RAIN RFID Reader, enabling a RAIN RFID solution that requires multiple read zones. The Impinj R700 Antenna Hub includes support that enables one cable to power the antenna hub, control active RF output, and carry the RAIN RFID signal. This requires fewer cables to install the Impinj R700 Antenna Hub, making it easier and less costly to install, and creates fewer points of failure in deployment.
-
Impinj R700 Water Resistant Case€100.67
Impinj R700 Water Resistant Case
With an IP 54 rating, the Impinj R700 Water Resistant Case case provides additional protection from dust and water spray. This water resistant case is compatible with the Impinj R700 RAIN RFID Reader. The Impinj R700 reader is rated at IP 50 and using this water resistant case will increase the rating to IP 54 for the front of the reader.
-
Zebra 802.11ac Wireless Card Kit for the ZT200 & ZT400 Series Printers€100.67
Zebra 802.11ac Wireless Card Kit for the ZT200 & ZT400 Series Printers
Zebra 802.11ac Wireless Card Kit for use with the Zebra ZT200 and ZT400 Series Printers (US/Canada).
-
Zebra Cutter for ZD421D & ZD621D Direct Thermal Printers€122.77
Zebra Cutter for ZD421D & ZD621D Direct Thermal Printers
Designed for use with Zebra ZD421D and ZD621D Direct Thermal Printers, this front-mount cutter kit allows a user to print and cut labels in batches or as individually controlled cuts based on the application needs. This field installable cutter CANNOT be installed at purchase and MUST be installed manually by the user. This kit includes a cutter, Torx T10, and extra screws for installation.
-
Zebra Preventative Maintenance Kit€10.13
Zebra Preventative Maintenance Kit
Designed for use with compatible Zebra printers, this kit offers on hand preventative printhead care to ensure optimum printer performance. This kit includes 6 unopened, pre-saturated foam tip swabs that have a 12-month shelf life. Each foam tip swab contains 99.7% Isopropyl Alcohol (IPA) and must be stored at room temperature 20° to 25°C (68° to 77°F).
-
Zebra Cutter for ZD410 Printers€117.70
Zebra Cutter for ZD410 Printers
This full cut 2 in (50.8 mm) width cutter is designed for use with Zebra ZD410 Direct Thermal Desktop Printers. This front-mount cutter kit allows a user to print and cut labels in batches or as individually controlled cuts based on the application needs.