RFID Accessories

Alien Nexus Multiplexer

The Alien Nexus Multiplexer system enables plug and play deployment of up to 32 added read points/read zones to a single ALR-F800 series RFID fixed reader. Continuing the Alien hallmark of ease of configuration, use, and scalability, the Nexus is able to be configured and operated using standard Alien Reader Protocol (ARP) commands, thus eliminating the need to have custom/special software written and maintained at additional cost.

Impinj Gateway Suspended Ceiling Mounting Kit

The Impinj Gateway Suspended Ceiling Mounting Kit simplifies xArray and xSpan installation in suspended ceiling applications. The kit contains a custom-drilled 2’x2’ plate that replaces a standard ceiling tile as well as the screws, anchors, and cables required to support the plate and gateway.

Impinj Speedway Revolution GPIO Adapter 

The Impinj Speedway Revolution GPIO Adapter allows for the simultaneous control of up to four Impinj Speedway Antenna Hubs per one Impinj Speedway Revolution R420 Reader. Each hub supports up to 8 antennas for a maximum of 32 antennas per Speedway R420 (4 hubs/R420 x 8 antennas/hub). This GPIO Adapter is also compatible with the Impinj Speedway R120 Reader and the Impinj Speedway R220 Reader (reader must be updated for Firmware version 7.6). One single Impinj R120 reader can be upgraded to eight antenna ports and one single R220 reader can be upgraded to sixteen antenna ports when used in combination with the a Speedway Antenna Hub and GPIO adapter.

ZebraDesigner Pro Barcode and RFID Software (v3)

ZebraDesigner Pro Barcode and RFID Software enables you to easily create professional, industry-standard and compliant labels quickly and easily. It features a Windows®-based interface that is intuitive to use, virtually eliminating training and required technical skills. Pair ZebraDesigner with Zebra’s industrial, desktop and mobile printers to quickly design a customized print solution to fit your needs. Upon ordering, a license key that offers a robust toolset to create complex label designs will be electronically delivered by email. 

Zebra 802.11ac Wireless Card for Industrial Series Printers

Zebra 802.11ac Wireless Card for use with the Zebra ZT100, ZT200, ZT400, ZT510, and ZT600 Series Printers (US/Canada). 

Zebra Soft Case with Shoulder Strap for ZQ620 & QLn320 Printers

Designed for use with Zebra ZQ620 and QLn320 Series Printers, this soft case adds an extra layer of protection in harsh environments. This case allows for the battery and ports to remain accessible and comes standard with a shoulder strap. While in the case, a compatible printer is IP 54-rated resistant to windblown water and dust.

NOTE: This case does NOT increase drop specification and does NOT include pockets or holders for media.

Zebra Soft Case with Shoulder Strap for ZQ510/ZQ511 Printers

Designed for use in harsh environments, this durability enhancing case adds an extra layer of protection in a soft case form factor. This case allows for the battery and ports to remain accessible via flaps and comes standard with a shoulder strap.

NOTE: This soft case CANNOT be used with a printer belt clip or MCR.

Zebra Soft Case with Shoulder Strap for ZQ630 & QLn420 Printers

Designed for use with Zebra ZQ630 and QLn420 Series Printers, this soft case adds an extra layer of protection in harsh environments. This case allows for the battery and ports to remain accessible and comes standard with a shoulder strap. While in the case, a compatible printer is IP 54-rated resistant to windblown water and dust.

NOTE: This case does NOT increase drop specification and does NOT include pockets or holders for media.

Zebra Soft Case with Shoulder Strap for ZQ610 & QLn220 Printers

Designed for use with Zebra ZQ610 and QLn220 Series Printers, this soft case adds an extra layer of protection in harsh environments. This case allows for the battery and ports to remain accessible and comes standard with a shoulder strap. While in the case, a compatible printer is IP 54-rated resistant to windblown water and dust.

NOTE: This case does NOT increase drop specification and does NOT include pockets or holders for media.

Zebra ZE500-4 (Right & Left Hand Configuration) 300 dpi Printhead

Maintain top performance of your printer with a genuine Zebra printhead. Zebra printheads provide exceptional performance and outstanding print quality as the printheads are made and tested to rigorous engineering standards. The Zebra ZE500-4 (RH & LH) 300 dpi Printhead is a direct replacement product for a worn down or damaged printhead. This spare part is easy to install and designed for use with the Zebra ZE500-4 Printer Engines.