RFID

Smartrac Web RFID Wet Inlay (M750)

Equipped with the Impinj M750 IC, Smartrac Web RFID Wet Inlays feature 96-bit EPC memory and 32-bit user memory. These compact tags are ideally shaped for apparel hang tags providing high read reliability, excellent performance even when stacked in close proximity, and best-in-class orientation sensitivity, with low total applied costs. Compatible with global GS1 UHF Gen2v2 standards, these tags are included on the approved inlay list by the ARC Program at the RFID Lab at Auburn University when used in retail applications, and comply with categories F, G, I, J, K, L, M, N, Q, W1, W2, W3, W4, W5, W6, and Y.

Smartrac MiniWeb RFID Wet Inlay (M750)

Smartrac MiniWeb RFID Wet Inlays excel in minimum footprint and top performance on difficult-to-tag and low-detuning materials such as cardboard and plastic, and in other demanding, close-coupling environments. Equipped with the M750 IC, these tags feature 96 bit-EPC memory and 32-bit user memory. Futhermore, the IC is compatible with the global GS1 UHF Gen2v2 standard and features a privacy mode that enables loss prevention and protects consumer privacy.

Smartrac Belt RFID Wet Inlay (M750)

Featuring the Impinj M750 IC, the Smartrac Belt RFID Wet Inlay offer high performance across different materials and challenging environments due to enhanced adaptive RF tuning capabilities. This tag offers improved read and write sensitivity, with very fast and accurate reading within a large population of tags. Additionally, this tag comes standard with a privacy mode, which enables loss prevention and protects consumer privacy by making a tag invisible to RFID readers. Compatible with global GS1 UHF Gen2v2 standards, Smartrac Belt tags with the Impinj M70 IC are included on the approved inlay list by the ARC RFID Research Center of the University of Auburn when used in retail applications, and comply with categories F, G, I, J, K, L, M, N, Q, W1, W2, W3, W4, W5, W6, and Y.

Smartrac MiniWeb RFID Wet Inlay (M730)

Smartrac MiniWeb RFID Wet Inlays excel in minimum footprint and top performance on difficult-to-tag and low-detuning materials such as cardboard and plastic, and in other demanding, close-coupling environments. These tags feature 128 bit-EPC memory and a privacy mode, which enables loss prevention and protects consumer privacy by making a tag invisible to RAIN readers. Compatible with global GS1 UHF Gen2v2 standards, these tags are included on the approved inlay list by the ARC Program at the RFID Lab at Auburn University, and comply with categories I, K, N, and Q.

SMARTRAC Web Dual Frequency RFID Wet Inlay (EM4423)

SMARTRAC Web Dual Frequency RFID Wet Inlays are ideally shaped for use as apparel hang tags or industrial labeling, providing high read reliability and optimum performance with low total applied costs. These inlays are equipped with the EM4423 chip that combines two functionalities on one single die: the EPC technology used for long-range application purposes and the NFC technology used to exchange data in close proximity. Both protocols may share a common, unique ID. Leveraging the IC’s unique features, Web Dual frequency inlays provides multiple benefits for retailers and logistics providers. Enabling NFC functionalities on top of UHF is straightforward, since only programming of the chip is needed. The NFC element opens up fascinating post-sales scenarios in conjunction with SMARTRAC’s Smart Cosmos solutions. Users, already carrying a NFC-enabled smartphone, can start the interaction with the product or simply by tapping the embedded tag. It allows customers to use their smartphones to access additional information about their purchases, such as user manuals, product warranty documentation, warranty programs, proof of product authenticity for anti counterfeiting purposes, and many more potential applications for retailers and industrial automation. SMARTRAC’s RFID inlays and tags are compliant with ISO 9001:2008 Quality Management and ISO 14001:2004 Environmental Management, which ensures reliable and state-of-the-art products that meet a variety of application needs.

SMARTRAC Belt RFID Wet Inlay (Monza R6-P)

Designed for global retail, industry and supply chain applications, SMARTRAC Belt RFID Wet Inlays provide excellent performance, including in close coupling environments. Belt products with the Monza R6-P chip offer unique TID, enable pre-serialized EPC and are 100% performance tested. These wet inlays are equipped with additional features such as add-on user memory, on-demand memory configuration, a kill function and easy access to control or change tag information for store data. 

SMARTRAC Belt wet inlays with the Impinj Monza R6-P IC are on the approved inlay list for boxed electronics by the AARC Program at the RFID Lab at Auburn University. These wet inlays comply with categories A, B, C, D, F, G, I, K, M, N, Q, W2, W3, W4, W5, and Y. Furthermore, they meet GS1 Tagged-Item Performance Protocol (TIPP) Tagged-Item Gradings M10B, S15B and M15B, S15B for the retail supply chain, retailers, and suppliers.

SMARTRAC Belt RFID Wet Inlay (Monza 5)

The SMARTRAC Belt UHF RFID Tag primarily targets item-level, logistics and supply chain applications. It meets the requirements of retail apparel applications due to a compact 3” form factor and special design which take into account RF requirements for close coupling. Close coupling occurs when RFID-tagged items are stacked in close proximity to each other. SMARTRAC RFID has worked with renowned independent test facilities, major retail end-users and RFID hardware providers, to test, qualify, and approve SMARTRAC Belt tags and inlays for deployment in item-level tagging applications.

Smartrac DogBone DURA White Wet Inlay (Monza R6-P)

Smartrac DogBone DURA White Wet Inlays combine excellent performance on different materials with outstanding robustness and water resistance, making them a suitable solution for demanding global supply chain and industrial applications in harsh environments. These inlays are characterized by thick, semi-stiff thermosetting layers attached to both sides of the antenna/IC structure. The encasement provides effective protection against mechanical and environmental stresses without affecting the overall performance of the underlying inlay design. Equipped with the Impinj Monza R6-P IC, Smartrac DogBone Dura inlays come with an Autotune feature, which helps the DogBone product to work at peak efficiency, even in rapidly changing environments.

SMARTRAC MiniWeb RFID Wet Inlay (Monza R6-P)

SMARTRAC MiniWeb RFID Wet Inlays have a small compact form factor, which can easily be converted into small-sized hang-tags and other apparel labels. MiniWeb products with the Monza R6-P chip offer unique TID, enable pre-serialized EPC and are 100% performance tested. These tags are equipped with additional features such as add-on user memory, on-demand memory configuration, a kill function and easy access to control or change tag information for store data.

SMARTRAC MiniWeb wet inlays with the Impinj Monza R6-P IC are on the approved inlay list for boxed electronics by the ARC Program at the RFID Lab at Auburn University. These wet inlays comply with categories A, B, D, G, M, Q (FCC) and K (ETSI). Furthermore, they meet GS1 Tagged-Item Performance Protocol (TIPP) Tagged-Item Gradings M10B, S15B and M15B, S15B for the retail supply chain, retailers, and suppliers. 

SMARTRAC BLING RFID Wet Inlay (Monza R6-P)

The SMARTRAC BLING RFID Wet Inlay is specially designed for jewelry and cosmetics applications, and offers excellent performance and superior close coupling features. BLING inlays and tags have a tiny (22 mm/0.9 inch) form factor, allowing them to be easily converted into small-sized hang-tags for jewelry labels, or attached to small cosmetic items. BLING inlays are suitable for full integration into the SMART COSMOS Cloud Services platform.

BLING products with the Monza R6-P chip offer unique TID, enable pre-serialized EPC and are 100% performance tested. These tags are equipped with additional features such as add-on user memory, on-demand memory configuration, a kill function and easy access to control or change tag information for store data. The SMARTRAC BLING RFID Wet Inlay is compliant with ISO 9001:2008 Quality Management and ISO 14001:2004 Environmental Management, which ensure a reliable and state-of-the-art product that meets a variety of application needs, especially in the retail environment.