RFID

Impinj Speedway Reader Port Pack

The Impinj Speedway Reader Port Pack provides a low-cost solution to drive many antennas from a single, fixed RFID reader. This port pack enables up to 32 antennas to a single Impinj Speedway R420 reader, up to 16 antennas to a single Impinj Speedway R220 reader (reader must be updated to the Firmware Version 7.6), and up to 8 antennas to a single Impinj Speedway R120 reader. 

Zebra 3-Slot Universal Charging Cradle for RFD8500 Sled

Versatile 3-Slot Universal Charging Cradle for the Zebra RFD8500 Bluetooth Handheld UHF RFID Sled with power supply and line cord.

Zebra 1-Slot Charging Cradle for RFD8500 Sled

This single slot charging cradle is compatible for use with the Zebra RFD8500 Bluetooth Handheld UHF RFID Sled.

Zebra 1-Slot Charging ShareCradle for RFD40 & RFD90 Sleds

This single slot charging cradle is compatible for use with Zebra RFD40 and Zebra RFD90 UHF RFID Sleds.

Zebra RFD40 Sled eConnex™ Adapter for EC50/EC55 Mobile Computers

The Zebra RFD40 Sled eConnex™ Adapter allows a single EC50 or EC55 Mobile Computer to be mounted on top of a Zebra RFD40 UHF RFID Sled and communicate directly to the reader. This adapter also allows both the RFD40 and EC50 or EC55 to be docked as a pair in Single or Multi-slot ShareCradles.

NOTE: This adapter MUST be used in conjunction with either a Zebra EC50 or EC55 Enterprise Mobile Computer with an 8-pin back I/O connector.

Zebra RFD90 Bluetooth Sled Adapter for TC5X Series Mobile Computers

The Zebra RFD90 Bluetooth Sled Adapter allows a single TC5X Series Mobile Computer to be mounted on top of a Zebra RFD90 Ultra-Rugged UHF RFID Sled and communicate via Bluetooth to the reader. This adapter also allows both the RFD90 and a TC5X series computer to be docked as a pair in Single or Multi-slot ShareCradles.

NOTE: This adapter MUST be used in conjunction with a compatible exoskeleton and is compatible with a TC5X Mobile Computer that comes standard with or without an 8-Pin back I/O connector.

Alien Nexus Controller Kit

The Alien Nexus Controller Kit enables plug and play deployment of up to 32 added read points/read zones to a single ALR-F800 series RFID fixed reader. Continuing the Alien hallmark of ease of configuration, use, and scalability, the Nexus is able to be configured and operated using standard Alien Reader Protocol (ARP) commands, thus eliminating the need to have custom/special software written and maintained at additional cost.

Zebra RFD90 Bluetooth Sled Adapter for TC21/TC26 Series Mobile Computers

The Zebra RFD90 Bluetooth Sled Adapter allows a single TC21 or TC26 Mobile Computer to be mounted on top of a Zebra RFD90 Ultra-Rugged UHF RFID Sled and communicate via Bluetooth to the reader. This adapter also allows both the RFD90 and TC21 or TC26 to be docked as a pair in Single or Multi-slot ShareCradles.

NOTE: This adapter is compatible with a TC21 or TC26 Mobile Computer that comes standard with or without an 8-Pin back I/O connector.

Zebra RFD90 Sled eConnex™ Adapter for TC52ax Mobile Computers SE4750 Imager

The Zebra RFD90 Sled eConnex™ Adapter allows a single TC52ax Mobile Computer with the SE4720 imager to be mounted on top of a Zebra RFD90 Ultra-Rugged UHF RFID Sled and communicate directly to the reader. This adapter also allows both the RFD90 and TC52ax to be docked as a pair in Single or Multi-slot ShareCradles.

NOTE: This adapter MUST be used in conjunction with a compatible exoskeleton and a Zebra TC52ax Mobile Computer that comes standard with an 8-pin or 10-pin back I/O connector and SE4750 Imager.

Impinj Speedway Revolution R420 UHF RFID Reader Evaluation Kit (4 Port)

Impinj, the only company possessing expertise in all areas of RFID system and component design, brings all the pieces of the RFID solution together into our Speedway Revolution Evaluation Kits. These kits provide users with a means to analyze the complete UHF Gen 2 answer for any RFID application, from pallet- and case-level down to item-level. By combining Impinj's fixed readers, near- and far-field reader antennas, Monza®-powered tags, and access to the latest Impinj support tools and documentation into one easy-to-install demonstration kit, customers can quickly verify the efficacy of an entire UHF Gen 2 RFID solution.