RFID

Zebra Soft Case with Shoulder Strap for ZQ610 & QLn220 Printers

Designed for use with Zebra ZQ610 and QLn220 Series Printers, this soft case adds an extra layer of protection in harsh environments. This case allows for the battery and ports to remain accessible and comes standard with a shoulder strap. While in the case, a compatible printer is IP 54-rated resistant to windblown water and dust.

NOTE: This case does NOT increase drop specification and does NOT include pockets or holders for media.

Zebra ZE500-4 (Right & Left Hand Configuration) 300 dpi Printhead

Maintain top performance of your printer with a genuine Zebra printhead. Zebra printheads provide exceptional performance and outstanding print quality as the printheads are made and tested to rigorous engineering standards. The Zebra ZE500-4 (RH & LH) 300 dpi Printhead is a direct replacement product for a worn down or damaged printhead. This spare part is easy to install and designed for use with the Zebra ZE500-4 Printer Engines.

Zebra Power Supply & Line Cord for ZQ500, ZQ600, and QLn Series Printers

This power supply and line cord charges compatible mobile printers or charging cardles via a wall outlet.

Zebra 1-Slot Battery Charger Kit for ZQ600, QLn, and ZQ500 Series Printers

The Zebra 1-Slot Battery Charger Kit docks and charges a single PowerPrecision+ Li-ion printer battery. With an integrated power supply, this battery charger kit works with both standard and extended battery packs.

Zebra 1-Slot Docking Cradle Kit for ZQ300 Series Printers

This single slot docking cradle kit supports charging for one ZQ310 or ZQ320 Printer. This cradle kit comes with the required USB-A to USB-C cable and AC to USB Adapter with US power plug.

Impinj Speedway Revolution GPIO Box

Impinj designed the Speedway Revolution GPIO Box for use with the Speedway Revolution reader to provide convenient access to the reader’s GPIO (General Purpose Input/Output) port. The GPIO Box interfaces with the reader via a supplied HD15 cable, and separates each input and output signal to easy-access screw terminals. Neighboring ground and power terminals accompany each signal terminal to easily connect three-wire devices. The GPIO Box also includes an on-board relay to interface with devices require high wattage or an open/short signal. A universal power supply end line cord is also required if the 5VDC supplied by the reader is insufficient (not included, purchase separately).

Zebra Cutter for ZT111 | ZT211 | ZT231 Industrial Printers

Designed for use with Zebra ZT111, ZT211, and ZT231 Industrial Printers, this external cutter with catch tray is designed for use with media such as tag stock to ensure a clean edge between labels.

NOTE: This field installable cutter CANNOT be installed at purchase and MUST be installed manually by the user.

Zebra Shoulder Strap with Snap Hook Adapters for ZQ600/QLN Healthcare Series Printers

Designed for healthcare environments, this disinfectant ready shoulder strap with snap hook adapters offers an over-the-shoulder carrying option.

Impinj Power Supply & Line Cord

For the Speedway R420, R220 and Speedway xPortal readers, the universal power supply and specific regional power cord are optional, depending on whether or not the Power over Ethernet (PoE) option is used. If the PoE option is not used, you must order a universal power supply and specific regional power cord. 

Zebra Power Supply and Line Cord

Includes a level VI AC/DC power supply brick with captive DC Cable and 2.3 m (7.5 ft) long, grounded, three wire US AC line cord.