RFID
-
Zebra FX9600 RFID Reader - 4 PortAs low as €999.13
Zebra FX9600 RFID Reader - 4 Port
The Zebra FX9600 RFID Reader delivers industry-best performance for high-volume, rugged environments. With support for PoE and PoE+, an IP 53 sealed housing rating, and four RF antenna ports, the FX9600 brings a new level of capability to asset tracking and inventory management applications. The FX9600 is available with an internal USB Host USB port which supports a Wi-Fi/Bluetooth dongle for direct wireless connectivity to your Wi-Fi network, as well as Bluetooth-enabled computers and other devices. There’s no need for hard-wired connections to the access point. With a best-in-class processor and expanded memory, the FX9600 offers the power needed to support very high traffic throughput and sophisticated software applications. Zebra also offers a FX9600 reader configuration that excludes the non-critical, internal Host USB port. This configuration offers the same features and functionality but requires an external passive or powered USB hub to connect to Bluetooth or Wi-Fi dongles to enable wireless communications and perform firmware updates instead of plugging a USB stick/dongle directly into the reader’s USB port.
-
Zebra FX9600 RFID Reader - 8 PortAs low as €1,174.07
Zebra FX9600 RFID Reader - 8 Port
The Zebra FX9600 RFID Reader delivers industry-best performance for high-volume, rugged environments. With support for PoE and PoE+, an IP 53 sealed housing rating, and eight RF antenna ports, the FX9600 brings a new level of capability to asset tracking and inventory management applications. The FX9600 supports a Wi-Fi/Bluetooth dongle for direct wireless connectivity to your Wi-Fi network, as well as Bluetooth-enabled computers and other devices. There’s no need for hard-wired connections to the access point. With a best-in-class processor and expanded memory, the FX9600 offers the power needed to support very high traffic throughput and sophisticated software applications.
-
Zebra AN480 (RHCP) RFID Antenna (865-956 MHz)€168.21Out of stock
Zebra AN480 (RHCP) RFID Antenna (865-956 MHz)
The Zebra AN480 single port antenna offers maximum performance and flexibility. The low axial ratio is nearly 50 percent lower than typical competitive devices, delivering a more uniform gain — and better performance. The wide frequency range enables this antenna to be utilized in worldwide deployments, providing cost-efficiencies and a simplified RFID infrastructure. The AN480 can be installed throughout the enterprise in manufacturing and warehouse floor environments, or any dock door receiving application. As with all Zebra antennas, the AN480 uses Zebra's standard mounting bracket — mounting the antenna for the first time or upgrading an existing Zebra antenna with the AN480 is fast and easy.
-
Zebra AN480 (LHCP) RFID Antenna (865-956 MHz)€168.21Out of stock
Zebra AN480 (LHCP) RFID Antenna (865-956 MHz)
The Zebra AN480 single port antenna offers maximum performance and flexibility. The low axial ratio is nearly 50 percent lower than typical competitive devices, delivering a more uniform gain — and better performance. The wide frequency range enables this antenna to be utilized in worldwide deployments, providing cost-efficiencies and a simplified RFID infrastructure. The AN480 can be installed throughout the enterprise in manufacturing and warehouse floor environments, or any dock door receiving application. As with all Zebra antennas, the AN480 uses Zebra's standard mounting bracket — mounting the antenna for the first time or upgrading an existing Zebra antenna with the AN480 is fast and easy.
-
Zebra MC3330xR Integrated RFID Handheld Reader€2,666.83
Zebra MC3330xR Integrated RFID Handheld Reader
Designed for standard-range data capture of RFID tags and barcodes for bulk inventory, the Zebra MC3330xR Integrated RFID Handheld Reader is loaded with innovative features that bring a new level of efficiency and accuracy to inventory and asset management applications. This handheld reader offers the same proven lightweight ergonomic design and superior RFID performance found on the MC3330R reader. Equipped with Zebra's most powerful and secure Android architecture, the MC3330xR comes standard with an ultra-powerful processor, an integrated NFC reader, and a 35% larger capacity battery for stellar performance in the most demanding environments. With the ability to capture RFID tags more than 6 m (19.7 ft) away, the MC3330xR helps workers capture RFID tags in half the time as the next leading competitor.
-
Zebra AN620 Slimline (LHCP) Indoor RFID Antenna (902-928 MHz)€263.81Out of stock
Zebra AN620 Slimline (LHCP) Indoor RFID Antenna (902-928 MHz)
The Zebra AN620 Slimline (LHCP) Indoor RFID Antenna features a simple, integrated mounting system that lets them stand just under one-half inch (12 mm) from horizontal or vertical mounting surfaces. Space-saving and stylish, the outer housing is designed to be sleek and discreet enough to be at home in any business setting, but rugged enough for indoor industrial environments. A perfect complement to the FX7500 RFID reader, the AN620 antenna is ideally suited for use in wall mount, doorways, under counter, above counter as an RFID pad, on shelves, POS or end-cap displays like jewelry counter applications.
-
Zebra MC3390xR Integrated Long-Range RFID Handheld ReaderAs low as €3,792.34
Zebra MC3390xR Integrated Long-Range RFID Handheld Reader
Designed for extended range data capture of RFID tags and barcodes for bulk inventory, the Zebra MC3390xR Integrated RFID Handheld Reader is loaded with innovative features that bring a new level of efficiency and accuracy to inventory management, order fulfillment, cross-docking, and more. This handheld reader offers the same proven lightweight ergonomic design and superior RFID performance found on the MC3390R reader. Equipped with Zebra's most powerful and secure Android architecture, the MC3390xR comes standard with an ultra-powerful processor, an integrated NFC reader, and a 35% larger capacity battery for stellar performance in the most demanding environments. The integrated long-range antenna delivers best-in-class RFID read range with higher throughput, allowing for inventory counts to be accomplished more quickly and accurately. With the ability to capture RFID tags more than 18.2 m (60 ft) away, the MC3330xR helps workers capture RFID tags in half the time as the next leading competitor.
-
Zebra AN610 Slimline (LHCP) Indoor RFID Antenna (902-928 MHz)€100.67
Zebra AN610 Slimline (LHCP) Indoor RFID Antenna (902-928 MHz)
The Zebra AN610 Slimline (LHCP) Indoor RFID Antenna features a simple, integrated mounting system that lets them stand just under one-half inch (12mm) from horizontal or vertical mounting surfaces. Space-saving and stylish, the outer housing is designed to be sleek and discreet enough to be at home in any business setting, but rugged enough for indoor industrial environments. A perfect complement to the FX7500 RFID reader, the AN610 antenna is ideally suited for use in wall mount, doorways, under counter, above counter as an RFID pad, on shelves, POS or end-cap displays like jewelry counter applications.
-
Zebra SP5504 Point of Sale RFID Antenna€100.67
Zebra SP5504 Point of Sale RFID Antenna
Track inventory in your POS lanes or will-call areas with the Zebra's advanced ready-to-use SP5504 Point of Sale (POS) RFID Antenna. Zebra's SP5504 Point of Sale RFID Antenna is designed to log items passing through POS lanes in a retail store, will-call area, or a warehouse facility. When used in combination with the Zebra FX7500 Reader, Zebra's SP5504 POS antenna provides a very tight read range to cover small areas such as a POS lane, without risking crossover reads from adjacent POS lanes.
-
Zebra SR5502 RFID AntennaAs low as €100.67
Zebra SR5502 RFID Antenna
Zebra's ready-to-use SR5502 RFID Antenna used in combination with the Zebra FX7500 Reader detects and records the movement of RFID-tagged inventory from the moment it enters your backroom or warehouse to the moment it leaves. This specialized antenna is designed to deliver increased accuracy and read rates in aisles and corridors, allowing this duo to easily handle the high tag volumes on the move in the backroom and warehouse.