RFID
-
Manufacturer ZEBRA Remove This Item
- Clear All
-
Zebra FX7500 RFID Reader - 2 PortAs low as €799.92
Zebra FX7500 RFID Reader - 2 Port
The new FX7500 Fixed RFID Reader introduces advanced Zebra designed RFID radio technology for faster, more accurate read rates and more consistent performance even in challenging environments. The new radio is paired with a more flexible Linux-based network architecture that integrates the tools and open-standard interfaces needed for fast, easy deployment with RFID and back-end applications. The result is a fixed RFID reader that sets a new performance standard — delivering peak performance at all times with excellent reader sensitivity and better interference rejection, at a lower cost per read point. The FX7500 is available with an internal USB Host USB port which supports a Wi-Fi/Bluetooth dongle for direct wireless connectivity to your Wi-Fi network, as well as Bluetooth-enabled computers and other devices. There’s no need for hard-wired connections to the access point. Zebra also offers a FX7500 reader configuration that excludes the non-critical, internal Host USB port. This configuration offers the same features and functionality but requires an external passive or powered USB hub to connect to Bluetooth or Wi-Fi dongles to enable wireless communications and perform firmware updates instead of plugging a USB stick/dongle directly into the reader’s USB port.
-
Zebra AN440 (LH/RH CP) Indoor RFID Antenna (902-928 MHz)€222.76
Zebra AN440 (RH/LH CP) Indoor RFID Antenna (902-928 MHz)
The AN440 RFID Antenna gives you a wide read field and high-speed RF signal conversion, so data capture is fast and accurate, even in expansive, high-demand environments. The AN440 is easy to mount on ceilings and walls, and its rugged white housing is at home in both customer-facing and industrial settings. So you can achieve superior read zones around stockroom shelves, warehouse doorways and dock platforms – anywhere boxes and pallets are moving into and out of your facility.
-
Zebra ST5501/ST5500 Transition Point Integrated RFID Reader€101.00
Zebra ST5501/ST5500 Transition Point Integrated RFID Reader
When inventory moves in or out of your facility through receiving and entry/exit points, you need to know which direction it is traveling to understand where it is headed to better track location or prevent theft. Where standard RFID readers detect the presence of a tagged item, this specially designed ready-to-use Zebra ST5501/ST5500 Transition Point Integrated RFID Reader utilizes industry-leading advanced RFID technology to not only track items on the move, but to also determine whether items are entering or leaving an area. Deployment is easy — with Zebra’s advanced FX7500 Fixed RFID reader and pre-configured antenna integrated into one housing, there’s only one piece of hardware to install. And since you can suspend it from the ceiling, it’s easy to install in virtually any facility and any environment.
-
Zebra FX9600 RFID Reader - 4 PortAs low as €1,002.40
Zebra FX9600 RFID Reader - 4 Port
The Zebra FX9600 RFID Reader delivers industry-best performance for high-volume, rugged environments. With support for PoE and PoE+, an IP 53 sealed housing rating, and four RF antenna ports, the FX9600 brings a new level of capability to asset tracking and inventory management applications. The FX9600 is available with an internal USB Host USB port which supports a Wi-Fi/Bluetooth dongle for direct wireless connectivity to your Wi-Fi network, as well as Bluetooth-enabled computers and other devices. There’s no need for hard-wired connections to the access point. With a best-in-class processor and expanded memory, the FX9600 offers the power needed to support very high traffic throughput and sophisticated software applications. Zebra also offers a FX9600 reader configuration that excludes the non-critical, internal Host USB port. This configuration offers the same features and functionality but requires an external passive or powered USB hub to connect to Bluetooth or Wi-Fi dongles to enable wireless communications and perform firmware updates instead of plugging a USB stick/dongle directly into the reader’s USB port.
-
Zebra FX9600 RFID Reader - 8 PortAs low as €1,177.93
Zebra FX9600 RFID Reader - 8 Port
The Zebra FX9600 RFID Reader delivers industry-best performance for high-volume, rugged environments. With support for PoE and PoE+, an IP 53 sealed housing rating, and eight RF antenna ports, the FX9600 brings a new level of capability to asset tracking and inventory management applications. The FX9600 supports a Wi-Fi/Bluetooth dongle for direct wireless connectivity to your Wi-Fi network, as well as Bluetooth-enabled computers and other devices. There’s no need for hard-wired connections to the access point. With a best-in-class processor and expanded memory, the FX9600 offers the power needed to support very high traffic throughput and sophisticated software applications.
-
Zebra AN480 (RHCP) RFID Antenna (865-956 MHz)€168.77Out of stock
Zebra AN480 (RHCP) RFID Antenna (865-956 MHz)
The Zebra AN480 single port antenna offers maximum performance and flexibility. The low axial ratio is nearly 50 percent lower than typical competitive devices, delivering a more uniform gain — and better performance. The wide frequency range enables this antenna to be utilized in worldwide deployments, providing cost-efficiencies and a simplified RFID infrastructure. The AN480 can be installed throughout the enterprise in manufacturing and warehouse floor environments, or any dock door receiving application. As with all Zebra antennas, the AN480 uses Zebra's standard mounting bracket — mounting the antenna for the first time or upgrading an existing Zebra antenna with the AN480 is fast and easy.
-
Zebra AN480 (LHCP) RFID Antenna (865-956 MHz)€168.77Out of stock
Zebra AN480 (LHCP) RFID Antenna (865-956 MHz)
The Zebra AN480 single port antenna offers maximum performance and flexibility. The low axial ratio is nearly 50 percent lower than typical competitive devices, delivering a more uniform gain — and better performance. The wide frequency range enables this antenna to be utilized in worldwide deployments, providing cost-efficiencies and a simplified RFID infrastructure. The AN480 can be installed throughout the enterprise in manufacturing and warehouse floor environments, or any dock door receiving application. As with all Zebra antennas, the AN480 uses Zebra's standard mounting bracket — mounting the antenna for the first time or upgrading an existing Zebra antenna with the AN480 is fast and easy.
-
Zebra MC3330xR Integrated RFID Handheld Reader€2,675.58
Zebra MC3330xR Integrated RFID Handheld Reader
Designed for standard-range data capture of RFID tags and barcodes for bulk inventory, the Zebra MC3330xR Integrated RFID Handheld Reader is loaded with innovative features that bring a new level of efficiency and accuracy to inventory and asset management applications. This handheld reader offers the same proven lightweight ergonomic design and superior RFID performance found on the MC3330R reader. Equipped with Zebra's most powerful and secure Android architecture, the MC3330xR comes standard with an ultra-powerful processor, an integrated NFC reader, and a 35% larger capacity battery for stellar performance in the most demanding environments. With the ability to capture RFID tags more than 6 m (19.7 ft) away, the MC3330xR helps workers capture RFID tags in half the time as the next leading competitor.
-
Zebra AN620 Slimline (LHCP) Indoor RFID Antenna (902-928 MHz)€264.68Out of stock
Zebra AN620 Slimline (LHCP) Indoor RFID Antenna (902-928 MHz)
The Zebra AN620 Slimline (LHCP) Indoor RFID Antenna features a simple, integrated mounting system that lets them stand just under one-half inch (12 mm) from horizontal or vertical mounting surfaces. Space-saving and stylish, the outer housing is designed to be sleek and discreet enough to be at home in any business setting, but rugged enough for indoor industrial environments. A perfect complement to the FX7500 RFID reader, the AN620 antenna is ideally suited for use in wall mount, doorways, under counter, above counter as an RFID pad, on shelves, POS or end-cap displays like jewelry counter applications.
-
Zebra MC3390xR Integrated Long-Range RFID Handheld ReaderAs low as €3,804.78
Zebra MC3390xR Integrated Long-Range RFID Handheld Reader
Designed for extended range data capture of RFID tags and barcodes for bulk inventory, the Zebra MC3390xR Integrated RFID Handheld Reader is loaded with innovative features that bring a new level of efficiency and accuracy to inventory management, order fulfillment, cross-docking, and more. This handheld reader offers the same proven lightweight ergonomic design and superior RFID performance found on the MC3390R reader. Equipped with Zebra's most powerful and secure Android architecture, the MC3390xR comes standard with an ultra-powerful processor, an integrated NFC reader, and a 35% larger capacity battery for stellar performance in the most demanding environments. The integrated long-range antenna delivers best-in-class RFID read range with higher throughput, allowing for inventory counts to be accomplished more quickly and accurately. With the ability to capture RFID tags more than 18.2 m (60 ft) away, the MC3330xR helps workers capture RFID tags in half the time as the next leading competitor.